The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
6/15/2016

Grieve No. 916 Walk-In Oven Cures Epoxy

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

This oven has all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Grieve Corp.’s No. 916 is a gas-heated, 500°F high-capacity walk-in oven designed for curing epoxy and phenolic fiber-reinforced parts inside steel molds. The dimensions of this oven measure 120" × 144" × 84". This walk-in oven is engineered with an aluminized steel exterior and interior, 4" thick insulated walls and a removable top-mounted heat chamber. The oven body was designed to split into two sections for easier shipment, and has all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325-cfm, ⅓-hp powered forced exhauster. 

RELATED CONTENT

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

  • Conveyors and Paint Systems

    Choosing the right conveyor system, coating technology, and ancillary equipment.

  • Phosphate Conversion Coatings

    Types of phosphate conversion coatings, how to apply them, and their specific functions.

Resources