The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
7/27/2015

Grieve’s No. 853 Oven Designed for Curing and Shrinking

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

No. 853 is designed for curing coating and heat-shrinking plastics.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Grieve’s No. 853 500°F electric belt conveyor oven is designed for curing coating and heat-shrinking plastics. Measured at 30" wide × 96" deep × 24" high, this oven contains a 2-ft. long open belt zone, an 8-ft. long insulated heat zone with recirculated airflow and a 2 ½-ft. long open belt unloading zone. Nichrome wire heating elements at 48 kW provide the heat, while a 4,200 cfm, 3-hp recirculating blower furnishes vertical downward airflow to the load.

The No. 853 oven features 4" insulated walls, a Type 304, 2B finish stainless steel interior, stainless steel exterior with No. 4 brush finish, as well as a 24" wide, 1" × 1" Type 304 stainless steel flat wire conveyor belt with ¼-hp motor drive, variable speed from 0.9 to 17.6 ipm. A side door enables access to the unit’s workspace.

No. 853 includes safety equipment such as PVC electrical conduit, a remote control panel, 325 cfm stainless steel powered forced exhauster, six-point thermocouple jack panel through the oven wall, digital temperature controller, manual reset excess temperature controller with separate contactors and recirculating blower airflow safety switch.

RELATED CONTENT

Resources