The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
9/26/2012

Haynncorp Gas-Fired Ovens, Truck Drive System

Originally titled 'Gas-Fired Ovens, Truck Drive System'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Haynncorp will highlight three gas-fired ovens it designed for a customer’s proprietary process as well as a powered truck drive system that is recessed into the floor.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Haynncorp will highlight three gas-fired ovens it designed for a customer’s proprietary process as well as a powered truck drive system that is recessed into the floor. This system drives a heavily loaded truck into the oven via a two-hand, tie-down operator station. The top of the conveyor and the v-groove tracks are floor level for limited interference by personnel in the work area. The drive unit and take-up unit are outside the oven. 

RELATED CONTENT

  • Conveyors and Paint Systems

    Choosing the right conveyor system, coating technology, and ancillary equipment.

  • Pretreatments: The Next Generation

    Emerging technologies can save energy, ease environmental concerns

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

Resources