The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
10/1/2015

Therma-Tron-X’s SlideRail Transfer System Minimizes Material Handling Time

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Parts index along a pair of low-maintenance slide rails, rather than a chain conveyor.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Therma-Tron-X’s SlideRail square transfer system is designed to perform high-volume finishing operations using a fraction of the space required by traditional monorail systems. Parts index along a pair of low-maintenance slide rails, rather than a chain conveyor. Racks of products suspend from load bar and raise and lower in and out of the processing tanks simultaneously, minimizing material handling time. These systems can handle high volume plating, electrocoating, auto-deposition coating, powder coating, liquid spray painting, cleaning, pretreatment and heat treating operations.

Related Topics

RELATED CONTENT

  • Today’s Paint-Application Methods

    An overview of spraying, dipping, flow coating, and everything in between.

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

Resources