PARTS CLEANING

Parts Cleaning

Eductors Enable Smaller Pumps to Circulate Large Volumes

Bex says its eductors take advantage of the surrounding liquid to create a high-velocity flow yield at the diffuser, circulating as much as five times the pump output with a discharge plume broader than the jet from a solid stream nozzle of equivalent energy.
#energy

Parts Cleaning

Chemistry/Equipment Combo Eliminates Spray Washer Discharge

Houghton International combines chemistry and equipment to eliminate process water discharge from its spray washers, enabling customers to avoid wastewater permitting, notice of effluent violations and cost associated with excessive water usage.

Parts Cleaning

Process Removes Paint from Hooks, Racks, Part Rejects

Atotech’s Master Remover 7000 is said to be a highly efficient and sustainable paint-removal process.

Parts Cleaning

Process Control System Designed for Metal Pretreatment Lines

Henkel’s Bonderite E-CO DMC is a multichannel process control system that enables running of a complex chemical process cascade with multiple stages in metal pretreatment production lines.

Parts Cleaning

Parts2clean Show Addresses Trends Impacting Parts Cleaning

The October event in Stuttgart, Germany, aims to help manufacturers and finishers solve some of the issues associated with trends like lightweight construction, changing manufacturing and coating technologies, and new materials and material combinations.

Parts Cleaning

Ultrasonic Agitation Cleaner Removes Supports from 3D-Printed Parts

Omegasonics’ 815BTX dual-tank benchtop ultrasonic cleaning machine eliminates the need to have two separate cleaning machines to remove supports that require chemicals vs. those that do not.

Parts Cleaning

Removing Contaminants Using CO2 Snow

Ever-increasing demands for clean component surfaces call for increasingly effective cleaning methods, like dry technologies.

Parts Cleaning

Choosing the Right Critical Cleaning Method

Successful cleaning methods are critical to ensure components work as they should. MicroCare’s Mike Jones suggests you develop a cleaning “scorecard” to help you evaluate cleaning processes.

Parts Cleaning

Slowing Corrosion Through Cleaning and Packaging

Ensuring that metal parts are properly cleaned and packaged can produce better results than oil coating.

Parts Cleaning

Erasing Particles with Ultrasonics

Particles can result in visible defects in coatings, can interfere with movement of bearings or critical components, can clog nozzles, and can render critical products non-functional.