PARTS CLEANING

Parts Cleaning

Exair Stainless Steel Blow-off Nozzles Resist Corrosion, Heat

These 1/8 NPT stainless steel nozzles replace open tubes and pipe nipples on parts cleaning, drying and cooling operations.

Parts Cleaning

Cleanliness Compliance Is Critical for Automotive Suppliers

The cleanliness of a car’s components can affect the way it operates. OEMs like Ford Motor Co. have created their own internal standards and have started cascading them to their suppliers.
#automotive

Powder Coating

Thin-Film Technology Powers Wisconsin Powder Coater

Basic American Medical Products uses a phosphorus-free pretreatment to improve first-pass-product yield and performance durability.
#medical

Parts Cleaning

Choosing Cleaning Wipes for a Specific Process

There are so many different cleaning wipes on the market. MicroCare’s Mike Jones offers some information to help you choose the right ones.
#economics

Parts Cleaning

Post-Cleaning Corrosion Prevention

Cleaning, passivation and corrosion protection are separate activities with distinct functions.

Electroplating

A Brite to Highlight Solutions for Cleaning, Finishing, Wastewater Treatment

A Brite says its exhibit at Sur/Fin 2018 will encompass the three areas in which it provides products and services: cleaning, surface finishing and wastewater treatment.
#plating #surfin

Parts Cleaning

Kyzen to Co-Host VOC Compliance Seminars

The first “Clean and Green” sessions will take place April 18 and 19, at co-host Stericycle’s facility in Inglewood, California. Seminars also will take place May 23 and 24, at co-host Ecoclean in Southfield, Michigan.

Parts Cleaning

Acid Pickle Cleaner Cuts Rust, Oxide Scale on Steel

Henkel’s Bonderite C-IC 182C metal cleaner is suited for both hot- and cold-rolled steel, and can be used as a conventional pretreatment spray or on an immersion line.

Parts Cleaning

Choosing the Right Cleaning Tests

The successful manufacturer doesn’t only avoid costs, but also values knowing as much as possible about the benefits and limitations of a cleanliness test, and of staying on top of process trends.

Parts Cleaning

Boosting the Power of Immersion Degreasing

How do you make your parts cleaning operation more efficient? Add agitation, says Bex’s Steve Phillips.