Electroplating

Exploring the: Electroplating Zone

729 Results for: Article

Sort by:
Published: 6/1/2019

Changes Bring Out the Best for Plating Shop
Arizona’s CRC Surface Technologies Improves Performance, Profits with Management Changes

Published: 6/1/2019

Impact of Intermetallic Species on Cast Aluminum Alloys for Anodizing Applications
Alloys with higher silicon concentrations can inhibit the growth of anodic oxide films under galvanostatic and potentiostatic conditions.

Published: 5/19/2019

The Relationship Between Vickers Hardness and Universal Hardness
The Vickers indenter hardness test, based on indenter displacement under test load (universal hardness), is being used for an increasing number of applications.  The new method is also subject to much discussion among the experts.  An impo...

Published: 5/19/2019

Evaluation of a Simple Thin-Film Ductility Tester and Review of the Ductility of Nickel Sulfamate Deposits
Originally published in 1992, this paper addressed a critical issue in the science of electroforming, that of the measurement and control of deposit ductility.

Published: 5/13/2019

Electrocodeposition of MCrAlY Coatings for Advanced Gas Turbine Applications - 5th Quarterly Research Report
The objective of the work is to study and optimize the MCrAlY electrocodeposition process to improve the coating oxidation/corrosion performance. In this quarter, work focused on preparation and characterization of CrAlY-based alloy powders for...

Published: 5/1/2019

New Technology, Equipment Boost Green Bay Anodizing
This past year, the shop installed a 5-tank, hardcoat anodizing line; computerized tracking software; and natural gas dryer that dries parts in less than 10 minutes.

Published: 5/1/2019

Youth Movement Spurs Aerodynamics Metal Finishing
A 30-employee shop is 50 percent millennials and 50 percent females as it recruits people who fit into their dynamic, instead of taking applications at the door.

Published: 5/1/2019

2019 Products Finishing Top Shop Stage at SUR/FIN Honors Best of the Best
These free events will honor the recipients of the Products Finishing Top Shops program, young leaders in the finishing industry, and those who have been inducted into the 2019 class of the Finishing Hall of Fame for the contribution to the industry...

Published: 5/1/2019

Finishing Activity Up Modestly in First Quarter of 2019
Gardner Intelligence’s Michael Guckes reports the March Finishing Index was 52.4.

Published: 4/1/2019

Pioneer Metal Finishing Soars on Employees, Culture
Pioneer uses their own Pioneer TV Network, company newsletter, fundamentals activities and training to get new and current employees integrated into the company culture and expectations.