Electroplating

Exploring the: Electroplating Zone

729 Results for: Article

Sort by:
Published: 4/1/2019

Continuous Improvements Drive Elite Metal Finishing
Elite Metal Finishing was singled out for Best Practices in the Products Finishing Top Shops Benchmarking Survey because of their extremely high detail to quality and customer communication.

Published: 4/1/2019

American Metal Coatings Tops Out at No. 1 Electroplating Operation
Ohio’s American Metal Coatings is the No. 1 finishing operation in North America based on the Products Finishing Top Shops Benchmarking Survey.

Published: 4/1/2019

Armoloy's New Owners Use Simple Marketing Strategy to Build Electroplating Business
Nolan Hannan and Jacob Meier purchased Armoloy in 2017, and knew they wanted a data-driven shop that they provided information on how well the shop was operating, and where improvements could be made.

Published: 4/1/2019

2019 Top Shops Benchmarking Survey Shows Some Improvements and Declines
The Products Finishing Top Shops Benchmarking Survey was conducted in December 2018, and was the fifth in a series of annual industry surveys. More than 45 metrics were measured in the survey, which included shops from the U.S., Canada and Mexico.

Published: 3/19/2019

Advancements in Brush Plated Metal Matrix Composites
Finding safer, eco-friendly alternatives to hard chromium plating has been a main driver of brush electroplating research for the last decade.

Published: 3/13/2019

The Mechanism of Nickel Corrosion in ENEPIG Deposits and How to Mitigate It
The incident of nickel corrosion in ENEPIG multilayers (electroless nickel, electroless palladium and immersion gold) was brought to light after it was observed during the analysis of gold wire bond lifts.

Published: 3/1/2019

ColDip Midnight 1500 Black Zinc Passivate Offers Enhanced Color and Cost Control
Three-part system allows for maximum color control and provides a consistent black appearance

Published: 3/1/2019

Composite Electroless Nickel Coatings for the Wind Energy Industry
The ability to tailor CEN coatings with an array of synergistic particles makes these coatings uniquely beneficial for applications in the wind energy industry.

Published: 2/18/2019

Nanoporous Anodic Oxides: Fabrication, Applications, Sensing and Biosensing
Numerous metals are subjected to anodic oxidation. As a result, one can obtain amorphous barrier-type oxides, crystalline barrier-type oxides or amorphous nanoporous oxides. This paper provides details of sensing techniques and recent advances in th...

Published: 2/18/2019

Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications - 4th Quarterly Research Report
This NASF-AESF Foundation research project report covers the fourth quarter of project work (October-December 2018) on this AESF Foundation Research project at the Tennessee Technological University.