Electroplating

Exploring the: Electroplating Zone

729 Results for: Article

Sort by:
Published: 5/19/2018

Acid Copper Technologies for Plating on Plastics
Automotive OEM performance requirements continue to increase which presents increased challenges to the supply chain to provide acceptable parts.  This presentation will introduce a new system of acid copper technologies that have been designed...

Published: 5/17/2018

Sur/Fin Products on Display - Auxiliary Equipment
You'll find all the top auxiliary equipment suppliers at this year’s Sur/Fin conference, to be held June 4-6 in Cleveland, Ohio.

Published: 5/17/2018

Transition from a Simple Auxiliary Anode to a Fully-developed Conforming Anode System for Plating
This paper demonstrates that the use of an elaborate CAE designed conforming anode system enables plating complex exterior automotive part designs within specification.  It will be shown that the increased fixed and variable production costs th...

Published: 5/11/2018

Sur/Fin Products on Display - Equipment
You'll find all the top equipment suppliers at this year’s Sur/Fin conference, to be held June 4-6 in Cleveland, Ohio.

Published: 5/3/2018

Sur/Fin Products on Display - Chemistry
Here’s a look at what will be on display from some of the top chemical suppliers at this year’s Sur/Fin conference, to be held June 4-6 in Cleveland, Ohio.

Published: 5/1/2018

Expansion Drives KC Jones Plating
After 60+ years of operation, the electroplater continues to grow, with facilities in Michigan, Indiana and now Mexico.

Published: 4/6/2018

Historical Highlights of Electroless Plating
In a 1984 article in Plating and Surface Finishing, for the AESF 75th anniversary year, Charles R. Shipley Jr. recounts the history of the commercialization of electroless plating beyond the discovery of electroless nickel by Dr. Abner Brenner and G...

Published: 4/6/2018

Reminiscences of Early Electroless Plating
The development of autocatalytic deposition was one of the most important developments in the history of surface finishing.  Here, in an article from Plating and Surface Finishing in 1984, the  AESF 75th anniversary year, Dr. Abn...

Published: 4/1/2018

2018 Top Shops Benchmarking Survey: H.R. and Training
An employee turnover rate of roughly 1 percent explains why Saporito Finishing is being honored for its excellence in the Human Resources and Training category.

Published: 4/1/2018

An Electropolishing Family Affair
Mother and daughter team up to run a Brooklyn finishing shop that focuses on the medical sector.