Research & White Papers

Exploring the: Research & White Papers Zone

63 Results for: Whitepaper

Sort by:
Published: 2/13/2017

Research and Decorative Coatings - The 19th William Blum Lecture
This article is a re-publication of the 19th William Blum Lecture, presented at the 65th AES Annual Convention in Washington, DC, on June 26, 1978.

Published: 2/13/2017

Iron Tungsten Alloy Plating with Low Friction and Wear Resistance
The modern automotive industry has been striving to reduce energy loss caused by friction. An alloy plating film developed by finely crystallizing iron and tungsten demonstrates both a high level of hardness and excellent ductility. In addition, l...

Published: 12/16/2016

Latest Developments in Mass Finishing
New materials, manufacturing processes, automation and the need for better surface finishes have driven new developments in mass finishing. This article discusses finishing solutions for very large and heavy parts, explains drag finishing technolog...

Published: 12/16/2016

Electrodeposition of Ni-Fe-Mo-W Alloys - 15th Quarterly Report
15th Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the 15th quarter of project work (July-September 2016).

Published: 11/7/2016

Calculating Applied Media Force during Vibratory Finishing
What appear to be identically set-up vibratory bowls will finish identical loads of parts in varying time cycles. This paper offers a new technique to better predict what the operator will produce, by measuring the force applied to the parts. It ...

Published: 8/18/2016

Electroless Nickel Plating Formulation For Automotive And Mechanical Parts
Electro less plating processes are considered to be much convenient, cheaper and best for deposition on parts with lot of holes, cleavages, bents, curves, abnormal shapes, threading etc., effectively and economically.

Published: 7/15/2016

Electrodeposition of Ni-Fe-Mo-W Alloys - 11th-12th Quarter Report
11th-12th Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the 11th and 12th quarters of project work (July-December 2015).

Published: 6/18/2016

Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 3 References and Biography
This article is the last of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada, on June 23, 1975. This section contains the reference/citation list and the author...

Published: 6/15/2016

Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 2
This article is the second of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plat...

Published: 6/13/2016

Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 1
This article is the first of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plati...