Electroplating, Electrochemistry and Electronics - The 15th William Blum Lecture - Part 4 References and Biography
This article is the last of four parts of a re-publication of the 15th William Blum Lecture, presented at the 61st AES Annual Convention in Chicago, Illinois, on June 17, 1974. This section contains the reference/citation list and the author biography.
#research #electronics
Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 1
This article is the first of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plating.
#research
Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 2
This article is the second of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plating.
#research
Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 3 References and Biography
This article is the last of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada, on June 23, 1975. This section contains the reference/citation list and the author biography.
#research
Electrodeposition of Ni-Fe-Mo-W Alloys - 11th-12th Quarter Report
11th-12th Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the 11th and 12th quarters of project work (July-December 2015).
#research #nasf
Electroless Nickel Plating Formulation For Automotive And Mechanical Parts
Electro less plating processes are considered to be much convenient, cheaper and best for deposition on parts with lot of holes, cleavages, bents, curves, abnormal shapes, threading etc., effectively and economically.
#research #automotive
Crack Formation During Electrodeposition and Post-deposition Aging of Thin Film Coatings - 3rd Quarterly Report
Third Quarterly Report - AESF Research Project #R-118. This NASF-AESF Foundation research project report covers the third quarter of project work (July-September 2016).
#research #nasf
Electrodeposition of Ni-Fe-Mo-W Alloys - 15th Quarterly Report
15th Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the 15th quarter of project work (July-September 2016).
#nasf #research
The Plater and Pollution - The 18th William Blum Lecture
This article is a re-publication of the 18th William Blum Lecture, by Dr. Joseph B. Kushner, presented at the 64th AES Annual Convention in Los Angeles, California, on June 27, 1977.
#research
Iron Tungsten Alloy Plating with Low Friction and Wear Resistance
The modern automotive industry has been striving to reduce energy loss caused by friction. An alloy plating film developed by finely crystallizing iron and tungsten demonstrates both a high level of hardness and excellent ductility. In addition, low friction can be achieved by its application under a layer of lubricant. It also has the merit of greater cost performance as compared with DLC produced with PVD technology.
#research #vacuum-vapor #energy