Korey Bell Named Westside Finishing President
Bell to lead powder coating form following his father's retirement.
Share
Korey Bell
Westside Finishing named former Operations Manager Korey Bell as company president. This follows the spring retirement of Korey’s father and company founder Brian Bell. According to the company, Korey has been heavily involved in many changes over the course of the company's history, including the installation of the automatic conveyor line system in 2014. Brian Bell founded the company nearly 40 years and grew it into one of New England’s largest powder coating job shops.
Visit wsfinish.com.
RELATED CONTENT
-
A Current Affair: Examining the "No Amperage" Phenomenon
If you are performing a coating process that requires the use of a rectifier, you may have experienced the "no amperage" problem. Here's a look at the phenomenon and some solutions…
-
Masking for Surface Finishing
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
-
Pretreatment for Painting
Better adhesion, enhanced corrosion and blister resistance, and reduced coating-part interactions make pretreatment a must.
