| 1 MINUTE READ

Emergency Decontamination Booths Come Fully Assembled

Hemco Corp.’s emergency shower booths are molded from one-piece, seamless, chemical-resistant fiberglass and are equipped with a pull-rod-activated shower and push-handle eye/face wash for immediately drenching of personnel that have been exposed to hazardous chemicals.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Hemco Corp. offers emergency shower booths that are fully assembled and ready for installation to water supplies and waste systems.

The decontamination booths are molded from one-piece, seamless, chemical-resistant fiberglass and are equipped with a pull-rod-activated shower and push-handle eye/face wash for immediately drenching of personnel that have been exposed to hazardous chemicals. The showers feature finished side exterior panels and are equipped with frosted-front strip curtains, interior grab bars, raised-deck grating, and bottom or rear drain outlets.

Visit emergencyshowerbooths.com.

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Choosing and Troubleshooting Copper Electroplating Processes

    A primer on this inexpensive and highly efficient process.

  • Gold and Silver Plating Basics

    An overview of precious metal electroplating processes.