| 1 MINUTE READ

Poly Products Closes Loop on Wastewater Evaporation

Poly Products’ Atmospheric Evaporator is designed operate at ambient to moderately low temperatures, allowing safe evaporation of water from plating solutions, rinse water for recovery of plating metals or wastewater.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Poly Products’ Atmospheric Evaporator is designed operate at ambient to moderately low temperatures, allowing safe evaporation of water from plating solutions, rinse water for recovery of plating metals or wastewater. Adding on the ET-Companion condenser creates a closed-loop system through which cool, dry air exhausted from the condenser is then ducted back into the inlet of the evaporator. The condenser recovers virtually all the water that is evaporated for reuse in the form of distilled water. There is no need for exhaust ducting, no air quality permits required and no need for air make-up, the company says.

RELATED CONTENT

  • Zinc Electroplating

    Choosing the best process for your operation.

  • Citric Acid Passivation of Stainless Steel

    An alternative product for passivation...

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.