This 3-part webinar series, presented by the Chemical Coaters Association International and Products Finishing, will provide an overview of critical system design considerations that must be taken into account when considering any type of finishing system. In addition, critical information regarding pretreatment, dry-off and curing will also be presented, as well as batch and automated systems. Presenters with expertise in finishing system design will share their knowledge and answer your questions. This is an important webinar if you are considering the installation of a new finishing system or upgrading an existing system. Whether you are painting or powder coating, you’ll walk away with valuable insight and tips for the best system to meet your needs.
The third part of this webinar series, focusing on drying and curing, will be presented by Kevin Coursin (Engineered Finishing Systems) and John Podach (Fostoria Process Equipment, a div. of TPI).
PART 3: November 3 at 2 p.m. - Drying and Curing
Kevin Coursin
Kevin Coursin is president of Engineered Finishing Systems, which designs solutions for liquid, powder, or ecoat applications. Kevin has been in the finishing business for several decades, and is a past president of the Chemical Coaters Association International.
John Podach
John has been with Fostoria Process Equipment, a division of TPI Corporation since 1976. Over the years he has proven his expertise in the industry and continues to deliver excellent service and training. He has built ovens and control panels, provided field service, served as the Process Equipment Lab Manager and for the past twelve years served as the Southeast Regional Sales Manager and Senior Application Sales Engineer. John also currently serves on the Industrial Heating Equipment Association Board of Directors.
PART 1: July 14 at 2 p.m. - System Design Parameters
Moderator: John Sudges, Midwest Finishing Systems
Speakers: Bruce Bryan, Vice President of Sales and Education, CCAI
John Sudges, Sales Manager, Midwest Finishing Systems
PART 2: September 8 at 2 p.m. - Pretreatment
Moderator: Sam Woehler, George Koch Sons, LLC
Speaker: Ken Kaluzny, Product Manager - General Industrial, Coral Chemicals
Sponsors:
