This intensive five-day course will take you through the basic steps of paint formulation, from understanding the process to an actual laboratory formulation. Through study and work in a laboratory, you can learn to formulate paints to meet specific requirements. You will have the opportunity to study and experiment with basic raw materials and their influences on the performance of the finished coatings, formulation and testing of coatings in the laboratory to meet the special demands of the job, limitations of plant production equipment and formulation variables for moving a coating from the lab to the plant and modern chemical instrumentation as applied to coatings.
In the classroom and in the lab you can put to work the techniques you have learned and test some of your own ideas. Learn how to solve formulation problems imposed by government regulations using methods of calculating formulas that assure you are in compliance.
*Course notes will be provided for all participants.
*A lab coat or apron, goggles and a calculator are necessary for this course. Lab coats and goggles will be provided if you do not have them.
LABORATORY WORK
TUESDAY: Formulation of a latex coating.
WEDNESDAY: Pre-testing of pigment dispersion for the formulation of paint based upon your interests. The choices are: latex, alkyd, water-borne urethane, water-reducible bake, water-borne alkyd, water-borne epoxy, high solids polyester, or UV cure.
THURSDAY: Putting together the paint designed Wednesday and dry-end testing of Tuesday's paint.
FRIDAY: Finish testing Tuesday's and Thursday's paints. Results exchange of all paints by all participants. Open discussion of results and suggestions for improvement of formulated coatings.
TIME SCHEDULE
MONDAY:
8:00 a.m. - Enrollment
8:30 a.m. to 5:00 p.m. - Class session
5:30 p.m. to 8:00 p.m. - Get Acquainted Dinner with Cash Bar
TUESDAY - THURSDAY:
8:00 a.m. to 5:00 p.m. - Class & Lab.
5:30 p.m. to 8:30 p.m. - Special help session (Tuesday night only)
THURSDAY EVENING:
6:00 p.m. to 8:00 p.m. - Complimentary Steak Dinner with Cash Bar
FRIDAY:
7:30 a.m. to 12:00 p.m. - Final Session
The final session will be Friday morning on Campus. This will be devoted to discussion and session will conclude at approximately 12:00 noon on Friday. Please schedule your travel arrangements accordingly. Please feel free to dress casually.
REGISTRATION INFORMATION
Pre-Registration is required and enrollment is limited. Register early to ensure yourself a place in this course.
COURSE FEE: $1,550.00 for the 2017 courses
TO PRE-REGISTER FOR A SHORT COURSE CONTACT US.
Telephone: (573)-341-4419 | E-mail address: mstformulation@mst.edu | Web: coatings.mst.edu
Please have the following information ready: Your Name, Company Name, Mailing Address, Telephone #, Fax #, e-mail address and method of payment (Cash, Check, or Invoice).
For further information about our current activities and Missouri S&T academic programs contact Michael Van De Mark at (573) 341-4419 or 4882, or e-mail: mstformulation@mst.edu. You can also write to us at Missouri S&T Coatings Institute, BOM #2, 651 W. 13th St., Rolla, MO 65409-1020. Our web site ishttp://coatings.mst.edu
Bureau of Mines651 W. 13th Street
Rolla, MO United States
573-341-4882
