ACT Process Verification Kit Audits Paint and Finishing Lines
Kit provides a test report, confirming corrosion resistance and coating performance, enabling users to determine product quality.
#surfin #measurement-testing
Edited by
ACT Test Panels’ Process Verification Kit is a custom set of test panels used to audit paint and finishing lines. Each kit is personalized to match the substrate(s) and pretreatment that is running in a given facility. Users process the panels on the line, then return them to ACT for corrosion testing. The company then provides a test report, confirming corrosion resistance and coating performance, enabling users to determine product quality.
Act Test Panels LLC|517-439-1485|acttestpanels.com
RELATED CONTENT
-
A Pulse/Pulse Reverse Electrolytic Approach to Electropolishing and Through-Mask Electroetching
Research at the authors’ laboratories has focused on pulse/pulse reverse electrolysis on cathodic processes, such as hard chromium plating from non-hexavalent chemistries. This papers describes studies into pulse/pulse reverse electrolysis as applied to electrochemical metal removal processes, such as electropolishing and electroetching.
-
Troubleshooting Chromium Conversion Coatings on Aluminum
This paper provides processors with an extensive troubleshooting tool when conversion coating failures are encountered.
-
Electroless Nickel-plated Steel versus Stainless Steel: Case Studies
This paper highlights two case studies of manufacturers that have replaced, or done studies to replace, stainless steel with electroless nickel-plated mild steel. In both cases, cost savings could be realized while maintaining or improving product quality.