The system is designed with a segmented polyurethane-coated basket to prevent part-on-part impingement and masking.
The system is designed with a turntable inside the blast enclosure that is servomotor-driven and controlled as a seventh axis of robotic motion.
The finishing chamber of the robotic blasting system is designed with a reinforced vestibule at the rear to house an ABB Robotics IRB-2600 robot.
To enable processing of components with different surface roughness specifications, the custom blast machine is designed with an enhanced media reclamation and delivery system for two different grit sizes.
The RB-72 TT was designed for production descaling and surface preparation.
Guyson Corp. offers the Model SS-10 SA rotary table wet blast system with manual and semi-automatic modes of operation.
Guyson Corp.’s RB-10-TC robotic grit blasting machine is adapted for processing aircraft turbine blades in production lots and designed for lightly attended operation, blasting an entire pallet-load of components without human intervention.
The new variant of the long-established model has a Fanuc Robotics LR Mate-200iD 6-axis robot mounted on the reinforced back wall of the blast chamber.
Guyson Corp., Booth N-6066, will introduce its Vaqua Komet automated wet blasting machine.
Guyson Corporation’s RB-RXS-400 robotic grit-blasting machine offers a 180-degree indexing table and servomotor-driven spindles holding multi-component fixtures for production surface preparation applications.
Designed for wet-blast cleaning, descaling and pre-polish treatment of dies or molds, Guyson’s Vaqua slurry blasting system features a gun manipulator that moves the blast nozzles vertically and horizontally in a repeatable, programmed routine.
ABS has been a supplier of wet blast machines to the aerospace, automotive, cutting tool, electronics, metalworking and other industries since 1988.
Guyson’s Model RB-600 robotic blast machine is designed to precisely repeat programmed surface preparation routines on individual components and automatically process a tray of parts without interruption.
Guyson Corp. offers a seven-axis robotic grit-blast system that automatically changes between blasting tools to perform critical surface preparation work around the exterior of complex-shaped components, as well as recesses and interior part surfaces.
Guyson Corp.’s Model RB-RSSA-8 seven-axis robotic grit-blast machine is configured for precision roughening of component surfaces in a production thermal spray coating cell.
Guyson Corp.'s Model RB-72 is an extended-height robotic blast machine with a 72 × 72-inch work envelope and pressure-blast media delivery for precision surface preparation applications in the aerospace industry, including composite structures.The Model RB-72 uses a Fanuc M-20iA robot as a blast nozzle manipulator.
Guyson Corp.’s RB-9 robotic blast system is specially adapted for glass bead peening in NADCAP-compliant manufacturing and overhaul operations that must perform the surface enhancement process according to AMS 2432 peening specifications, including peening of stage-one titanium fan blades.
The RX-800-RB blast system from Guyson Corp. is designed to rapidly process fragile automotive electronic parts that require a precise degree of impact treatment on one side.
Guyson Corp.’s Model RB-600 robotic blast system is designed for single-piece-flow processing of precision components and is available with special adaptations for shot peening or surface preparation of turbine buckets and blades.
Guyson Corp.’s seven-axis, direct-pressure blast machine features a 30 × 40 × 30-inch work envelope and a small overall footprint for lean, cell-based component processing.
Please visit: Guyson Corp. of U.S.A.
13 Grande Blvd.
Saratoga Springs, NY 12866 US
Blasting & Washing Made Productive
Guyson is a designer and builder of blast cabinets, automated blasting systems and work cell parts washing equipment. Manufacturers and finishers have benefited from Guyson's in-depth applications experience since 1938. Problem-solving work on your project is supported by evaluation and trials in the fully equipped engineering test laboratory at Guyson's modern 80,000 sq. ft. plant in Saratoga Springs, NY. Beginning with selection of the best blast media or aqueous solutions to produce the results you want and capturing data on vital process parameters, we recommend suitable component handling methods and processing equipment to meet your production and surface condition requirements. Our original customer-centered method, an enormous range of field-proven designs, our integrated CAD system, and hundreds of pre-engineered adaptations are Guyson resources that assure you of an efficient solution and successful results. Count on Guyson for innovative engineering and superb quality in all the details, including ongoing service.
Guyson Corporation, part of the Guyson International group of companies, was founded in 1975, and its engineering and manufacturing operations, including our contract finishing job, employ 50 people in Saratoga Springs. It takes many different talents to make Guyson the place “Where Quality Comes to the Surface.”
Every member of the Guyson factory team contributes to each machine we build and participates in our quality management system.
We measure our success as designers and builders of custom-engineered machinery by the satisfaction of our customers and the pride they take in owning a Guyson blast system made in the U.S.A.