xxx


« Prev | | Next »

Sort by:


Liquid Coatings Clinic Smooth Liquid Coatings
Q. What could be the reasons I cannot seem to get my coating smooth enough for my application?
Ask an Expert Published: 1/1/2017
Liquid Coatings Clinic: Improving Liquid Corrosion Resistance
Q. How can we improve the desired corrosion resistance expected from our coating?
Ask an Expert Published: 1/1/2017
Liquid Coatings Clinic: Correcting Liquid Adhesion Issues
Q. I cannot get the desired adhesion of my coating to my part. What should I look for to fix this problem?
Ask an Expert Published: 1/1/2017
Liquid Coatings Clinic: Considerations When Purchasing a Spray Booth
Q. Our company is in the market for a new spray booth and has been looking at several options. We want to make sure it is energy and cost efficient. What should be considered in the design of a spray booth to capture paint overspray?
Ask an Expert Published: 12/1/2016
Parts Cleaning Clinic: Brass Cleaning
Q. How do I clean brass to be powder coated? Expert David Peterson explains that, assuming you have some mill oil or metalworking lubricant on the surface of the brass, the minimum pretreatment needed is a degreasing of some type.
Ask an Expert Published: 11/1/2016
Parts Cleaning Clinic: Cleaning of Inconel
Q. What cleaning methods are recommended for finishing Inconel 718? Can this material be passivated or utilize the Summa process as 300 and 400 series stainless steel, or is there another way to remove the contaminants in regards to machining parts ...
Ask an Expert Published: 11/1/2016
Parts Cleaning Clinic: Phosphate Coating Problems
Q. We electrocoat sheet metal, iron castings (machined and non-machined) and aluminum castings (machined and non-machined surfaces) and are having problems with poor phosphating on aluminum substrates. We maintain the free acid at 0.7-1.1 points and...
Ask an Expert Published: 11/1/2016
Parts Cleaning Clinic: Pretreatment Equipment Suppliers
Q. I am researching manufacturers of aqueous part washers and phosphate pretreatment systems for powder coating, looking for companies that build conveyor systems, washers and treatment systems; not parts washers. The parts to be cleaned are various...
Ask an Expert Published: 11/1/2016
Downdraft Versus Cross-Draft Booths
Q. We are considering a new spray booth, and we’ve read a lot about the different types of airflows. What can you tell me about downdraft booths and cross-draft booths, and what should I consider in adding one to my shop?
Ask an Expert Published: 11/1/2016
Liquid Clinic: Is Air Free?
What's the cost of compressed air and how can a business calculate air consumption?
Ask an Expert Published: 10/1/2016

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved