« Prev | | Next »

Sort by:


Overcoming Strict Solvent Cleaning Regulations
Aerospace manufacturer tries unique approach to meet agency regulations
Article Published: 10/1/2012
Ionic Liquids for Cleaning Operations at Air Force Air Logistics Centers: Part II
Researchers evaluate cleaners for potential use in wiping applications.
Article Published: 10/1/2012
Ultrafiltration in Electrocoating Becoming Critical
UF it closes the mass balance of the process while producing rinse waters from the electrocoat paint bath, often resulting in 95 percent or higher transfer efficiencies with no net water addition.
Article Published: 8/1/2012
PARTS CLEANING: Re-Thinking Precision Cleaning of Tools
A new cleaning line has eliminated manual scrubbing labor and increased throughput for Hardcoating Technologies as its commitment to quality has taken it from coating 67,000 cutting tools in its first year to more than 1.7 million over the next deca...
Article Published: 8/1/2012
PARTS CLEANING: Ultrasonic Cleaning for Large Lots of Small Parts
With ultrasonic cleaning, particulate and film-like soils can be removed not only reliably, but also very quickly and efficiently—even on parts with difficult-to-access hollow spaces such as blind holes, knurling and grooves.
Article Published: 8/1/2012
PPG Industries, AkzoNobel Launch New Aerospace Coating Products
The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon En...
Article Published: 5/1/2012
Sand + Snow Makes Pretreatment Essential
Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO
Article Published: 5/1/2012
Are Ionic Liquids Right for Your Parts Cleaning Job?
Ionic liquids have also been considered for parts cleaning applications because of their negligible vapor pressure, high thermal and electrochemical stability, and low melting points of less than 100°C.
Article Published: 4/1/2012
New Engines Drive Parts Cleaning Innovation
When Cummins began designing its new operations at its Indiana plant, the company made the decision to not skip over the small details, which included making sure that its parts cleaning and deburring were just as sophisticated as its machining oper...
Article Published: 4/1/2012
Solvon Meeting Military Inspection
Poly Systems in Deer Park, NY has released an updated version of its Solvon FB cleaning solvent blends consisting of a high-purity, patented combination of n-propyl bromide and pentafluorobutane.
Article Published: 2/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved