Plating Room Flooring
Question: I have to learn more about the types of flooring available for the modern plating room.
Question:
I have to learn more about the types of flooring available for the modern plating room. Are there any articles on this subject? S. K.
Answer:
I must admit that I have not been asked this question very often but there are a number of sources of information. One source is a book, Electroplating Engineering Handbook, 4th edition, edited by Lawrence J. Durney. The book is out of print but used copies are available at www.amazon.com. Another more readily available resource is the Metal Finishing Guidebook & Directory.
Related Content
-
Three Tips for Optimizing Surface Prep for Plating
By identifying oil slicks, performing in-line tests and observing tank appearance, many problems are solved regarding surface preparation in the plating process.
-
Advantages to Pumped Eductor Agitation
Not all agitation methods are created equally. Pumped agitation with eductor nozzles can improve process tanks and quickly show a reduction in operating costs while keeping staff safe, following environmental legislation and preventing pollution.
-
3 Tests to Ensure Parts are Clean Prior to Plating
Making sure that all of the pre-processing fluids are removed prior to plating is not as simple as it seems. Rich Held of Haviland Products outlines three tests that can help verify that your parts are clean.
