basics
How to Measure Ecoat Throwpower in the Field
Axalta’s Dan Rose says the regular monitoring, recording and charting of throwpower can be a very valuable tool for ensuring quality.
Read More
When to Perform Vacuum Impregnation on Parts
Andy Marin from Godfrey and Wing says the general rule is that vacuum impregnation should be done before any surface finishes.
Read MoreUnderstanding Metallic Effect Powder Coatings
Metallic effect powder coating is a broad term, and Axalta’s Mike Withers says it usually covers powder coatings that have aluminum or mica pigments.
Read More
Electrolytic Versus Electroless Nickel Plating
Electroless and electrolytic nickel platings are effective at significantly improving a part’s strength and durability, but the differences between the two processes are important to distinguish.
Read MoreHow to Select the Right Heater for Your System
When selecting equipment to operate a process lines, Edward Dulzer from Process Technology says there is a wide variety of products to choose from.
Read MoreHow to Ensure Topcoat or Sealer Maintains Corrosion Resistance
Adam Blakeley with MacDermid Enthone Industrial Solutions says there are six crucial parameters for proper application of sealers.
Read MoreHow to Clean Parts Properly Before Powder Coating
Ken Kaluzny, from Coral Chemical, says that if mill oil is not removed from parts, you would observe pin holes and craters in the cured powder paint.
Read MoreHow to Use Manufacturing Technology to Reach Finishing Goals
If your coating operation has big growth goals for this year, then solutions engineer Bill McGee from Plex Systems says you should have a deep understanding of the way your shop works.
Read More
The Mechanism of Nickel Corrosion in ENEPIG Deposits and How to Mitigate It
The incident of nickel corrosion in ENEPIG multilayers (electroless nickel, electroless palladium and immersion gold) was brought to light after it was observed during the analysis of gold wire bond lifts.
Read More
Powder Coating Institute 3000 and 4000 Certifications—What You Need to Know
Assessment Program Offers Comprehensive Audit for Custom Coaters and OEMs
Read More
