Thin Parts Stick Together
The process is acceptable, but the problem is that the parts stack together in the vibrator, and about 15 percent of them have to be reprocessed.
Internal Burrs Quadruple Finish Time
I have a deburring problem on the inside of a steel ring.
A BLAST! Students tour Guyson's robotic blasting plant
Part of their week-long “summer camp” experience
Investigation of Tin Whisker Formation
Immersion tin and lead-free hot air solder leveling (HASL) coatings based on SnCu or SnAgCu alloys are widely used as surface finish materials for printed circuit boards (PCB). These coatings prevent the underlying copper from corrosion and preserve its solderability during lead-free assembly processes and for a long storage life of PCBs.
#research #electronics #pollution control
Increasing Vibratory Efficiency by Optimizing the Choice of Media Shape Relative to Part Geometry
When choosing vibratory media, understand the size, shape, starting roughness condition and metallurgical structure of the part.
#surfin #basics
What it Takes to be a Great Board Member
Whether you’re on a board yourself, or looking to start one, keep these five steps in mind.
Making the Grade With Mechanical Media
Understanding media grades is important to good mechanical finishes.
#surfin #basics
Finishers can use free software to show that reshoring is about even to overseas
Finishing shops can show how keeping products in the U.S. is almost even to going overseas
#surfin
Chemically Accelerated Vibratory Surface Finishing (CAVSF) with Oxalic Acid-Based Solutions
It has been shown that the inexpensive chemically accelerated vibratory surface finishing (CAVSF) process can reduce the average surface roughness.
#surfin
Improving Appearance of Aluminum
Can mass finishing provide a nice looking, shiny part at a reasonable cost?