Pneu-Mech Promotes Jason Gatton to Director of Sales

Gatton will be responsible for estimating, sales and marketing
#sales #marketing


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Pneu-Mech Systems Mfg. has appointed Jason Gatton as director of sales.

Gatton joined Pneu-Mech in 1996, working in the fabrication and installation departments. He has also worked in estimating, system sales and special projects.

Gatton will be responsible for estimating, sales and marketing, and will work out of the Pneu-Mech corporate office in Statesville, North Carolina.




  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

  • Pretreatment for Painting

    Better adhesion, enhanced corrosion and blister resistance, and reduced coating-part interactions make pretreatment a must.

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.