Norton | Saint-Gobain Abrasives Suppliers Showroom

Masking Tape Optimizes Paint Masking Process in Collision Repair

Norton Premium Automotive Masking Tape delivers high performance with sharp paint lines, flexible backing, and UV protection, suited for collision repair and more.

Polishing Compounds and Surface Finishing Products

The Farécla line is designed for optimal finishes on painted surfaces, gel coats and wood lacquer.

RazorStar Line of Belts, Quick-Change and Fiber Discs

Source: Norton | Saint-Gobain Abrasives Saint-Gobain Abrasives will exhibit a range of abrasives that optimize the user experience.

Engineered Shaped Ceramic Grain for Better Grinding

RazorStar fiber discs, quick-change discs and belts offer high performance in tough grinding applications.

Saint-Gobain Abrasives Announces New Partnership with Dedeco Abrasive Products

Saint-Gobain Abrasives will market Dedeco’s Sunburst line of thermoplastic-bonded abrasives.

Abrasive Wheels, Discs Provide Fast Metal Removal

The grit wheels and discs are designed to stay sharper longer.

Choosing Abrasive Compounds

Abrasive compounds for finishing a range of applications from prime automotive to painted cabinetry to composites.

Video Podcast: Norton | Saint-Gobain Abrasives' APS Automation Cell Tour

Mike Shappell of Norton | Saint-Gobain Abrasives, takes PF on a video tour of the company’s new Abrasive Process Solutions (APS) automation cell, which offers finishers a path to automation for mechanical finishing processes.

Norton Releases Abrasives Product Guide

New product guide simplifies right angle grinding abrasives selection.

Norton Saint-Gobain Abrasives Expands Farécla Products

Ten new compounds and pads have been added to the Farécla line for cutting, polishing, and finishing.

Robotic Process Development for Finishers

Norton | Saint-Gobain’s new Abrasive Process Solutions (APS) lab offers path to automation for mechanical finishing processes.

Embracing the Future of Finishing

Products Finishing editor-in-chief Scott Francis discusses the challenges and the changing landscape of the finishing industry — and how new technologies might carry the industry forward.

Norton BlazeX F980 Fiber Discs Greatly Increase Cut Rate

Norton Saint-Gobain’s BlazeX F980 Fiber Discs dissipate grinding heat to offer a 50% increase in cut rate and disk life over the original Blaze F980.

Achieving a Mirror Finish

New buffing technology minimizes clean-up and improves quality, cycle time and finish on automatic/robotic applications.

Norton Saint-Gobain Debuts Farécla Polishing Compounds

Norton Saint-Gobain has launched a new line of Farécla products for polishing and surface finishing within a wide array of markets.

Saint-Gobain Abrasives Launches Safety Resource Microsite

Saint-Gobain Abrasives has launched a new online resource center focusing on the safe use of Norton abrasive products.

Norton Buffing Wheels Eliminate Need for Buffing Compound

Fixed Abrasive Buff wheels are tear resistant, waterproof and durable, providing significantly longer life than traditional cotton buffs.

Increasing Output for Large Stainless Steel Sheet Surface Polishing

Mike Shappell from Norton Saint-Gobain shows how a manufacturer benefits from applying products and techniques to improve the bottom line.

Norton Fiber Discs Enable Faster Cut Rates

Discs are designed for cutting carbon steel and soft-to-grind materials.

Smaller Abrasives Provide Lightweight, Ergonomic Grinding

Norton Merit Pink R928 designed for challenging materials and difficult-to-reach applications.

Fiber Discs Enable Faster Cut Rates

Designed for cutting carbon steel and soft-to-grind materials.

Norton Carbide Burrs Designed for Surface Removal

Burrs have a hardness of a tungsten carbide substrate and stronger tooth formulation

Grinding Wheels Have Rounded Grain for Faster Cutting

Saint-Gobain Abrasives’ Norton Quantum3 RightCut Wheels boast a more rounded grain than the typical precision-shaped ceramic grains, which allows for faster cutting action and less vibration, also helping to reduce operator fatigue.

Pneumatic Die Grinder Provides High-Efficiency Surface Finishing

The Norton Pneumatic Die Grinder from Norton | Saint-Gobain Abrasives features a free speed of 25,000 rpm, designed for quick deburring, light to medium surface cleaning and finishing.

Proprietary Grains Remove Metal and Produce Consistent Finishes

Norton’s Vortex belts and wheels use non-woven technology to achieve structured results.

Combination Wheels Boost Cutting, Grinding Productivity

Saint-Gobain Abrasives’s Norton Quantum3 (NQ3) line of depressed-center grinding wheels includes combination wheels designed for more efficient and faster cutting and grinding, resulting in increased productivity and longer wheel life.

Greaseless to Greatness for Structured Surface Finishes

The conversion from greaseless abrasive compounds and buffs to nonwoven technology for textured satin finishes without the mess.

Advancements in Non-Woven Abrasives

Abrasive technology is streamlined for metal fabrication applications.

How to Select the Right Flap Disc

Consider these five variables to determine what fits your application.

How To Choose and Use Non-Woven Abrasives

Abrasive products are usually categorized as bonded abrasives and coated abrasives, but there is a third category that prepares and applies a final finish to the surface, these are non-woven abrasives . . .