Planetary Dip Spin Coating
PULZ, developed with EJOT GmbH & Co. KG is capable of coating T10 TORX and smaller without head fill. The system provides an ultra uniform coating on parts.
#surfin
Share
Efficiency with high-quality coating — even with a T10 TORX with a 2.74 mm point-to-point recess. Parts with internal drives in the order of M3 (1/8”) can achieve the highest gauge accuracy during coating.
High acceleration, coupled with instant and continuous part reorientation ensures an even coating thickness over the entire surface of a part’s thread, shaft, head, drive, etc. The even distribution results in a paint savings of up to 30% compared to conventional coating processes. Testing found the even distribution of coating increased corrosion protection properties while using less chemistry
WMV USA | 248-202-6493 | wmvusa.com
RELATED CONTENT
-
Black Chromium Finishing: Beauty and the Beast
Over the past 10 years, there has been commercial development of black chromium deposits from a trivalent chromium electrolyte. This paper will review the deposit characteristics and operational consideration of these similar, but different chromium plating deposits.
-
A Process for Alkaline Non-cyanide Silver Plating for Direct Plating on Copper, Copper Alloys and Nickel Without a Silver Strike Bath
Traditionally, silver is electroplated in toxic, cyanide-based chemistry. Due to cyanide’s extreme hazard to human health and environments, developing non-cyanide silver chemistry is essential for the silver electroplating industry. Discussed here is an aqueous, alkaline non-cyanide silver plating technology, which can be directly plated over nickel as well as copper and its alloys. The silver deposits have perfect white color and better anti-tarnishing properties than other non-cyanide silver processes. The silver is plated entirely from the dissolving silver anode and the bath is very stable, and maintains a stable pH level both during plating and idle time. This new non-cyanide silver technology will plate bright silver that is perfectly suitable for electronic, industrial and decorative applications. .
-
Hybrid Sol-Gel Coatings in Surface Engineering
A look at the use of modified sol-gel polymer films and hybrid system coatings, as well as the methodologies for evaluating the mechanical properties of the coatings.
