Gilbert & Jones Provides National Distribution, Technical and Lab Services
Gilbert & Jones (G&J) is a national distributor that primarily serves the metal finishing and water treatment industries. The company says it offers these industries the highest quality products specific to customers’ needs at competitive prices, while also providing technical and laboratory services. G&J represents many of the world's leaders in proprietary and generic chemistry, as well as respected manufacturers of anodes for any plating process.
#surfin
Share
Gilbert & Jones (G&J) is a national distributor that primarily serves the metal finishing and water treatment industries. The company says it offers these industries the highest quality products specific to customers’ needs at competitive prices, while also providing technical and laboratory services. G&J represents many of the world's leaders in proprietary and generic chemistry, as well as respected manufacturers of anodes for any plating process.
Gilbert & Jones Company Inc. | 860-832-8550 | gilbertandjones.net | Booth 621
RELATED CONTENT
-
A Process for Alkaline Non-cyanide Silver Plating for Direct Plating on Copper, Copper Alloys and Nickel Without a Silver Strike Bath
Traditionally, silver is electroplated in toxic, cyanide-based chemistry. Due to cyanide’s extreme hazard to human health and environments, developing non-cyanide silver chemistry is essential for the silver electroplating industry. Discussed here is an aqueous, alkaline non-cyanide silver plating technology, which can be directly plated over nickel as well as copper and its alloys. The silver deposits have perfect white color and better anti-tarnishing properties than other non-cyanide silver processes. The silver is plated entirely from the dissolving silver anode and the bath is very stable, and maintains a stable pH level both during plating and idle time. This new non-cyanide silver technology will plate bright silver that is perfectly suitable for electronic, industrial and decorative applications. .
-
Defects in Hard Chromium Deposits Part I: Causes and Cures
The causes of and remedies for defects in hard chromium deposits are explored in the first of this two-part P&SF article from 1984. Photomicrographs and SEM (scanning electron microscope) photographs will illustrate that most defects in various hard chromium deposits arise from defects in the basis metal. These defects may be in the original metal surface or may be caused by preplate finishing. Homogeneous hard chromium deposits can be produced only by eliminating these defects. Practical suggestions and procedures will be given.
-
Aluminum Surface Finishing Corrosion Causes and Troubleshooting
In this paper, a review of several process solutions, examining coolants, solvent cleaning, alkaline clean/etch and deoxidizing/desmutting, listing intended and unintended chemical reactions along with possible mechanisms that would favor corrosion formation.
