| 1 MINUTE READ

Carlisle Fluid Technologies, Ohio College Team Up for Spray Finishing Training

A three-day intensive training program on spray finishing technology will be held March 6-8, 2019, at Owens Community College in Toledo, Ohio.
#workforcedevelopment

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Carlisle Fluid Technologies, makers of Binks, DeVilbiss, Ransburg and BGK equipment, is teaming up with Owens Community College in Toledo, Ohio, to present a three-day intensive training program on spray finishing technology March 6-8, 2019.

Classes will meet from 8:30 a.m. to 4:00 p.m. daily and include both classroom and hands-on sessions. Two Continuing Education Units will be award to participants who complete the program. Attendees should be involved with industrial, contractor, or maintenance spray finishing applications, or spray equipment sales and distribution. Topics to be covered in the workshop include:

  • Equipment types and selection.
  • Equipment setup, operation and maintenance.
  • Surface preparation and defect analysis.
  • Material selection.
  • Safety and regulatory concerns.

To register. contact Jaime Wineland, Owens Community College, Workforce and Community Services Division, at 800-466-9367, ext. 7320, or by e-mail at: sprayworkshop@netscape.net. Information also is available online.

Related Topics

RELATED CONTENT

  • Phosphate Conversion Coatings

    Types of phosphate conversion coatings, how to apply them, and their specific functions.

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

  • Pretreatment for Painting

    Better adhesion, enhanced corrosion and blister resistance, and reduced coating-part interactions make pretreatment a must.