Evaluating and Solving Racking Needs on Any Scale
Taking on a new coating project can be challenging, but Donovan Dixon of ProductionPlus says proper planning can make things go smoother, especially if you are implementing a new line or a larger project.
#racking
How To Better Control Powder Coating Film Thickness
If you struggle to avoid light coating in some areas of your parts, then expert Rodger Talbert has some suggestions on how to better control film build.
#basics #racking
Options for Removing Paint from Part Racks
Traditionally, paint removal is achieved by either mechanical, thermal or chemical methods, and often it is contracted out.There are some key disadvantages to outsourcing your paint-removal requirements, however, explains Atotech’s Sylvain Masson.
#racking
Leading an Effective and Efficient Powder Coating Operation
Axalta Coating Systems’ Mike Withers has some sound advice for an inexperienced painter who’s been charged with running a powder line.
#racking
Fixing Adhesion Failures and Bubbles in Powder Coating on Zinc
Expert Rodger Talbert helps a coater who is having issues with the application of powder on zinc castings.
#racking
Using Eductors to Achieve Uniform Plating
The ABCs of good plating from Bex’s Dave Keely: agitation balances chemistry.
#racking
Are Burn-Off Ovens Safe?
Steelman Industries’ Carlton Mann says burn-off ovens are safe, and he offers some considerations for installing one.
#racking #curing #ask the expert
Tips for Applying Epoxy and High-Solids Paint
Controlling a coating’s thermal viscosity is a top priority, says Sames Kremlin’s Steve Romer.
#racking #basics
RighTech Maintains Decades-Deep Design Library
RighTech Fabrications offers an extensive library of heat exchangers, racking systems, anode baskets, custom components and specialty fasteners, having created thousands of parts and designs for metal finishing clients over its 50 years in business.
#racking
Determining the Best Racking Arrangement for Powder Coating
Use common sense to figure out the optimum hanging patterns for coating parts, advises powder expert Rodger Talbert.
#racking
Reducing Ecoat Costs Without Affecting Quality
Axalta’s Joe Subda suggests taking an eight-step problem-solving approach to get cost savings from an electrocoating operation.
#racking
Improving Corrosion Protection
How can you improve a powder coating system to prevent corrosion on parts? Powder Expert Rodger Talbert suggests adding blasting and priming.
#racking
Solving Corrosion on Black-Dyed 7000 Series Alloy
What caused corrosion on one shop’s black-dyed parts? Anodizing expert Larry Chesterfield offers troubleshooting advice.
#racking
Controlling Dirt on Coated Parts
What can be done to better control the amount of dirt in a powder system and on coated parts? Powder expert Rodger Talbert weighs in on this and other questions.
#racking
When to Look at Racking Options on a New Line
Where does racking fit in planning a new powder coating line? Production Plus’ Donovan Dixon says right from the start.
#basics #racking
Choosing the Best Strike Chemistry
Q. How do we ensure we have the best available strike chemistry for our plating application? Coventya’s Brad Durkin explains how process and the sequences are an important metric to success.
#racking
How to Apply the 720 Rule to Current Density Anodizing
What can you tell me about the 720 Rule as it applies to current density anodizing? Plating expert Sjon Westre, Ph.D., from Chemeon, answers this question.
#basics #racking
How to Increase Line Density
Q. Our finishing shop applies both liquid and powder applications, as well as some plating, too. How can we increase our racking line density by adding more parts per foot? Racking expert Scott Rempala has the answer.
#basics #racking
How to Increase Throughput with Racking
Q. How can I increase the throughput of my finishing line through proper racking protocols?
#basics #racking
Can Aqueous Alkaline Cleaner Be Used on Aluminum?
Q. Should I not use the same bath to process aluminum and stainless steel? Can aqueous alkaline cleaner be used on aluminum?
#racking