Electroplating

Exploring the: Electroplating Zone

35 Results for: Whitepaper

Sort by:
Published: 8/18/2016

Electroless Nickel Plating Formulation For Automotive And Mechanical Parts
Electro less plating processes are considered to be much convenient, cheaper and best for deposition on parts with lot of holes, cleavages, bents, curves, abnormal shapes, threading etc., effectively and economically.

Published: 6/15/2016

Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 2
This article is the second of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plat...

Published: 6/13/2016

Theoretical and Practical Aspects of Alloy Plating - The 16th William Blum Lecture - Part 1
This article is the first of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plati...

Published: 9/16/2015

The Adhesion of Electrodeposits to Plastics
The 1966 Carl E. Huessner Gold Medal Award was given to Dr. Edward Saubestre and co-workers for Best Paper appearing in Plating in 1965, and their paper is republished here in a series on the AES/AESF/NASF Best Paper Awards. This paper is a compreh...

Published: 6/18/2015

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 9
Ninth Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the ninth quarter of project work (January-March 2015). In this period, Graduate student Avinash Kola has continued work on the influen...

Published: 5/17/2015

Some Engineering Aspects of Electrodeposition - The 6th William Blum Lecture
This paper is a re-publication of the 6th William Blum Lecture, presented at the 51st AES Annual Convention in St. Louis, Missouri, on June 15, 1964.

Published: 4/18/2015

Electroless Nickel-plated Steel versus Stainless Steel: Case Studies
This paper highlights two case studies of manufacturers that have replaced, or done studies to replace, stainless steel with electroless nickel-plated mild steel. In both cases, cost savings could be realized while maintaining or improving product ...

Published: 2/19/2015

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 7
Seventh Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the seventh quarter of project work (July-September 2014).

Published: 1/20/2015

Manufacturing of Electrocatalytic Material for Large Scale Hydrogen Production by the Combination of Electroplating, PVD, Thermochemical Diffusion and Leaching Processes
This paper is a fine example of the multitude of ways that surface finishing can be brought to bear in process development. In this case, a combination of processes is applied to large scale hydrogen production.

Published: 12/20/2014

Methods and Formulas to Determine Internal Deposit Stress in Applied Metallic Coatings
Internal stress exists in electroplated and chemically applied metallic coatings. This paper reviews the test procedures for measuring deposit stress and the formulas used to calculate stress values. Many formulas used require modification to obta...